FREE SHIPPING FOR ORDERS OVER $99

Skip to content

How to clean my Mistral Front Load Washing Machine?

By Bilal Alwan

Cleaning the filter:

  1. Pull and remove the filter net.
  2. Clean the filter net with a small brush or a toothbrush.
  3. Insert the filter net and fasten its connector firmly.

Cleaning the debris filter:

  1. Open the filter cover using a coin or a key.
  2. Unscrew the emergency drain cap and pull out the emergency drain tube to drain off the remaining water.
  3. Hold the cap on the end of the emergency drain tube and allow all the water to flow into a bowl.
  4. Unscrew the emergency drain cap by turning it counter clockwise.
  5. Clean the debris filter and the inside of the drain hose.
  6. Replace the debris filter, the emergency drain cap and tube and then close the filter cover.

Important note:

  • If you open the debris filter when water remains inside the tub, water may flow out.
  • If the debris filter is assembled incorrectly or not installed, it may cause a water leakage or operating error. Therefore make sure to assemble it correctly.